Connect with us

Lifestyle

5 Helpful Tips for Safely Driving on Roads Through Floods

Published

on

5 Helpful Tips for Safely Driving on Roads Through Floods

Pre-monsoon showers have carried a genuinely necessary help to individuals across many parts of the country in the last few days after three months of unbearable heat during the scorching summer. In any case, the rains bring new challenges, particularly for people escaping their homes for everyday tasks like work, grocery shopping, medical checkups, and so on.

The waterlogged streets in major urban centers of the country, particularly the Metros and Tier-1 cities make it a threat for commuters and drivers. We’ve compiled a list of five helpful tips for safely driving on roads that have been inundated with water in this article.

  1. Keep away from regions with large pools of standing water

In general, try not to pass through water-clogged streets where the water level is higher than the most reduced part of the vehicle’s bodywork, i.e., the lower part of the front bumper or the sills beneath the doors. The majority of cars are unable to withstand high levels of water, which can clog the exhaust and seep through the radiator to reach the engine. Keep away from underpasses since the water stays stale after heavy rainfall.

  1. Continue to move slowly

If you go over a pool of water, consistently keep the vehicle moving and try not to slow down in that frame of mind of the pool, which might allow an opportunity for the water to go into the internals. Also, don’t accelerate or brake too hard, as doing so could cause the car to stall. Continuously drive in lower gears, i.e., first or second gear.

  1. Try not to restart, if the engine is slowed down

If tragically you wind up abandoned in a pool of water with the engine slowed down, restarting the engine is best not. The connecting rods are put under too much pressure, and the water’s pressure could easily break them when the engine is restarted. Moreover, if water has arrived at the motor via the intake or emissions, it could genuinely harm the engine and cost a lot of money to repair.

The best solution is to get out and push the car to an area that is not flooded. When you are certain that water has streamed out of the exhaust and other internals, restarting the car is safe.

  1. Don’t panic, stay calm

The door may not open if the vehicle is submerged in water to a depth that is significantly greater than its capacity. If the door is stuck, one must remain calm and not panic. Rolling down the windows and getting out as soon as the water gets too deep is the first thing to remember. If it’s not possible, they discover a sharp or heavy object to smash the window pane.

  1. Use brakes once a vehicle is out of the risk area

Apply your brakes to dry out the vehicle’s brakes after it emerges from the flood water and before you actually need to use them. Water build-up can make the brakes fail and can ultimately cause what is happening. Getting out the excess water will permit the car to move without a hitch and answer rapidly to commands from the driver.

Continue Reading
Advertisement
follow us on google news banner black

Facebook

Recent Posts

Trending

error: Content is protected !!